Window Treatment Hardware Reveals Your Style

You need to be very selective in choosing the window treatment hardware. There are design supports, not to be very visible, and allow only curtains to be highlighted to draw all the attention. Window treatment hardware consists of Finals, holdbacks, drapery pins, and swag holders. There is a huge variety in these; you have to be aware of the brands and their performance. There is variety in materials also like Brass cast, wrought iron, steel, gold and nickel plated. If you want your hard ware to be visible then select the style which goes with curtains. This enhances the beauty of curtains.

Firstly you need to evaluate window and the window covering that you are planning to use. Then decide whether you would like to install the window frame inside or outside. Each window frame has got different application. It depends on your idea of style and the size of window which include basic traverse rod, ceiling mount rod, a swivel rod, and a tension rod. The outside mount has no restriction as such. You need to consider whether your window treatment is movable or stationary? Continental rod or pole with finals could b used with stationary treatment where as the traverse rods go very well with movable treatment. You have to make a decision on which frame would you want to take. There is beautiful and decorative hard ware to be shown off! And if you wish window hardware to be unseen, the traverse rod will do the trick in the best manner. It allows curtains to flow beautifully.

Be sure you plan well in advance about where the operating controls will be located. Usually you place the control on the side with the best access and least visibility. See that your plan is implemented in a systematic way. It should not be cluttered have the cord system on the right for the right window, and the other on the left side for the left window.